|
AVAILABLE TRANSDUCER DOCUMENTATION Documentation pertaining to general and specific transducer types has been published by many sources. Additional documentation is constantly being prepared or updated. Since the content of these documents is subject to continuing review, users are urged to contact the responsible organization for the most up-to-date editions. The following list of documents pertaining to transducers with electrical output is provided as a guide to the type of available material. This listing is not intended to be all-inclusive. Accelerometers and Vibration ANSI S2.2 - 1959, USA Standard Methods for the Calibration of Shock and Vibration Pickups. ANSI S2.11 - 1969, American National Standard for the Selection of Calibrations and Tests for Electrical Transducers Used for Measuring Shock and Vibration. ANSI Z24.21 - 1957, American Standard Method for Specifying the Characteristics of Pickups for Shock and Vibration Measurement. IEEE Std 337 - 1978, IEEE Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Pendulous, Analog Torque Balance Accelerometers. ISA - RP 37.2 - 1982, Guide for Specifications and Tests for Piezoelectric Acceleration Transducers for Aerospace Testing. ANSI/ISA - S37.5 - 1975, Specifications and Tests for Strain Gage Linear Acceleration Transducers (R.1982). Fluid Velocity ASME PTC 19.5.3 - 1965, Fluid Velocity Measurement. Microphones and Sound Power ANSI S1.1 - 1960, USA Standard Acoustical Terminology (Including Mechanical Shock and Vibration). ANSI S1.4 - 1983, American National Standard Specification for Sound Level Meters. ANSI S1.8 - 1969, American National Standard Preferred Reference Quantities for Acoustical Levels. ANSI S1.10 - 1966, USA Standard Method for the Calibration of Microphones. ANSI S1.12 - 1967, USA Standard Specifications for Laboratory Standard Microphones. ANSI S1.13 - 1971, Methods for Measurement of Sound Pressure Levels (R.1976). ANSI S1.30 - 1979, Guidelines for Use of Sound Power Standards and for the Preparation of Noise Test Codes (see ASA 10-79). ANSI S1.31 - 1980, Precision Methods for the Determination of Sound Power Levels of Broad-Band Noise Sources in Reverberation Rooms (see ASA 11-80). ANSI S1.32 - 1980, Precision Methods for Determination of Sound Power Levels of Discrete-Frequency and Narrow Band Noise Sources in Reverberation Rooms (see ASA 12-80). ANSI S1.33 - 1982, Engineering Methods for Determination of Sound Power Levels of Noise Sources in a Special Reverberation Test Room (see ASA 13-82). ANSI S1.34 - 1980, Engineering Methods for Determination of Sound Power Levels of Noise Sources for Essentially Free-Field Conditions Over a Reflecting Plane (see ASA 14-80). ANSI S1.35 - 1979, Precision Methods for Determination of Sound Power Levels of Noise Sources in Anechoic and Hemi-Anechoic Rooms ( see ASA 15-79). ANSI S1.36 - 1979, Survey Methods for Determination of Sound Power Levels of Noise Sources (R.1985) (see ASA 16-79). Pressure Transducers
ASME PTC 19.2 - 1964, Pressure Measurements. |